Truck Mounted Deep The Hole Water Well Drilling Rig CSD1000

• Customization: Available
• After-sales Service: Provided
• Warranty: 1 Year
• Model NO.: CSD1000
• Certification: CE, ISO 9001:2000
• Condition: New
• Motor: Diesel Engine
• Drill Hole Diameter: 140mm-650mm
• Drill Hole Depth: 1000m
• Bit Type: Drag, DTH & Tricone Bit
• Drilling Way: Rotary
• Type: Truck Mounted
• Truck Type: 6X4 or 8X4
• Rotation Torque: 4800-9600n.M
• Pull Back Capacity: 20ton
• Model: Bw850/5
• Transport Package: 40fr Container
• Specification: 11000*2480*7147mm
• Trademark: JCDRILL
• Origin: China
• HS Code: 8430419000
• Production Capacity: 2000/Set
• Package Size: 1050.00cm * 248.00cm * 365.00cm
• Package Gross Weight: 22000.000kg

Product Description

CSD1000 Multi-functional truck mounted water well drilling rig is a efficient,multi-function full hydraulic water well drilling rig.It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad.
CSD1000 truck mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling,DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.CSD1000 deep water well drilling rigs, in cutting drilling or rotary drilling can be operated in unconsolidated layer, and the slag can be discharged under by mud, the impact drilling operation can also be adopted and slag can be discharged by pressure air, the hydraulic water well drilling rig suitable for drilling complicated geological conditions.
1.The drilling rig can use air DTH Hammer drilling and mud drilling.
2.Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
3.The truck chassis adopts the 6X4 special crane chassis of brand Sinotruck Howo and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed system are set up on the chassis.
4.It's a hydraulicrotary drilling rig with directional circulation. It is equipped with BW850/5 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5.The power of drilling rig comes from a CMS engine,132kw CMS engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
6.The rotary head,have two gear,rotation speed is 0-80 and110rpm stepless adjustment and the rotary torque is 9600-24500Nm.
7.The pulling force can be regulated and controlled, which adapt the machine to deep hole drilling.
8.It can set up a generator which is convenient to welding or illuminate for work at night.
9.Main winch are available on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
10.The main drive of rig is hydrulic and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are also hydraulic operated.
11.The tools winch winch is used for auxiliary lifting and casing,optional main winch force of 4T, rope length of 100m and 8m lifting height.
12.The Hydraulic auxiliary functions are easy and efficient for guide extension, boom swing, boomlift, guide dumping.
13.Competitive in price, low cost of maintain.

1	Geology drilled		All kinds
2	Drilling Type		DTH & Mud Rotary
3	Drill system and operation		Hydraulic
4	Hole Diameter	mm	Φ140-Φ650
5	Hole Depth	m	1000
6	Rotation Torque	Nm	9600    1st Gear
			14500   2nd Ger
7	Rotation Speed	rpm	0-80    1st Gear
			0-110   2nd Ger
8	Drill pipe diameter	mm	89/114
9	Drill pipe length	mm	4000/4500
10	Axial pressure	T	10
11	Max. Lifting force	T	37
Winch
12	Lifting force of Main winch(Optional)	T	4
13	Lifting force of hoist	T	1.5
14	Length of steel wire rope(tool winch)	m	100
15	Lifting height of tool winch	m	8
Engine
16	Diesel Engine type	CU,MMINS
17	Rated Horse power	Kw	179
18	Electrical System	24	Volt
Compressor required
19	Compressor Type	Rotary Screw/Movable
20	Pressure Required	Mpa	1.05-6.9
21	Air consumption	m³/min	16-96
Truck
22	Manufacturer		SINOTRUCK HOWO
23	Model		ZZ1317M4661W
24	Engine		WD615.61A
25	Rated Horse power	Hp	245
26	Discharge Standard		EU-2
27	Drive type		6*4
28	Max.Speed	Km/h	102.9
29	Steering wheel		left/right(Optional)
Mud Pump
30	Type		Hydrulic
31	Model		BW850/5
32	Stroke	mm	260
33	Displacement	L/Min	850
34	Discharge pressure (Mpa)	Mpa	5
35	Suction tube diameter	mm	89
36	Discharge pipe diameter	mm	51
37	Liner Diameter	mm	150
Hydraulic Welder(Optional)
38	Mnufacturer		Finland Dynaset
39	Welding current	A	60-250
40	Hydraulic Min.oilflow	L/min	42
41	Nom/Max Pressure	Bar	190/210
42	Voltage	V	110/220VDC
43	Power	Kw	1or2
Generator
44	Generator		Optional
Dimension
45	Net Weight	T	22
46	Shipping Length	mm	10500
47	Shipping Width	mm	2480
48	Shipping Height	mm	3650
49	Working size(L*W*H)	mm	11000*2480*7147

Q: Are you original manufacturer?	Q: Which payment terms are available to us?	Q: Which Incoterms 2010 terms can we work?
A: Yes, we JCDRILL is a official leading manufacture in drilling machinery in China and we have the whole series products you need.	A: T/T term or L/C term. On T/T term, 30% down payment is required in advance, and 70%  balance shall be settled before shipment. On L/C term, a 100% irrevocable L/C without "soft clauses" can be accepted.	A: We JCDRILL are a professional and international company, accept all Incoterms 2010 terms, normally we work on FOB, CIF, CFR, CIP.
Q: How long will the delivery time take?	Q: How about after sales service?	Q:Spare Parts When You Need Them
A: Normally mud pump products will take about 3-15 days to produce the ordered machines. Most of the time, we can have an immediate delivery of our regular machines in 15 days.	A: 365×24 Year-round Service We are committed to year-round 24-hour service even during holidays, in line with our policy of always providing "a response within 15 minutes and job completion within 24 hours."	A:We have spare parts centers across continents that stock specialist spare parts. We promise that spare parts will be delivered within 72 hours or no more than one week.

TWD TWD