| Customization: | Available |
|---|---|
| After-sales Service: | Provided |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CSD200A Truck Mounted Water Well Drilling Rig
CSD200 Multi-functional truck mounted water well drilling rig is a efficient,multi-function full hydraulic water
well drilling rig.It is high efficiency because of having a larger torque of the turntable and is mainly used for
water well in industry and agriculture, national defense building foundation, geological exploration,
geothermic well and other foundation working, it is popular at home and abroad.
CSD200 truck mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and
air DTH hammer in rock drilling,DTH Hammer is applied in rock drilling, slag is discharged by air pressure
and the offstage efficiency is ten times than traditional rotary drilling.
CSD200 deep water well drilling rigs, in cutting drilling or rotary drilling can be operated in unconsolidated
layer, and the slag can be discharged under by mud, the impact drilling operation can also be adopted
and slag can be discharged by pressure air, the hydraulic water well drilling rig suitable for drilling
complicated geological conditions. 
Specification
| 1 | Geology drilled | All kinds | |
| 2 | Drilling Type | DTH & Mud Rotary | |
| 3 | Drill system and operation | Hydraulic | |
| 4 | Hole Diameter | mm | Φ140-Φ450 |
| 5 | Hole Depth | m | 300 |
| 6 | Rotation Torque | Nm | 3050-6100 |
| 7 | Rotation Speed | rpm | 60-120 |
| 8 | Drill pipe diameter | mm | 89/102/114 |
| 9 | Drill pipe length | mm | 3000/4500 |
| 10 | Max.Pull down capacity | T | 85KN |
| 11 | Max.Pull back capacity | T | 16 |
| Winch | |||
| 12 | Lifting force of Main winch(Optional) | T | 5 |
| 13 | Lifting force of hoist | T | 1.5 |
| 14 | Length of steel wire rope(tool winch) | m | 100 |
| 15 | Lifting height of tool winch | m | 7.5 |
| Engine | |||
| 16 | Diesel Engine type | YUCHAI | |
| 17 | Rated Horse power | Kw | 70 |
| 18 | Electrical System | 24 | Volt |
| Compressor | |||
| 19 | Brand | KAISHAN | LGZJ18/17 |
| 20 | Compressor Type | Rotary Screw/Movable | |
| 21 | Pressure Required | Mpa | 17 |
| 22 | Air consumption | m³/min | 18 |
| Truck | |||
| 23 | Manufacturer | SINOTRUCK | |
| 24 | Model | EQ1208G7 | |
| 25 | Engine | WD615.47 | |
| 26 | Rated Horse power | kw | 273 |
| 27 | Discharge Standard | EU-2 | |
| 28 | Drive type | 6*4 | |
| 29 | Max.Speed | Km/h | 93 |
| 30 | Steering wheel | left/right(Optional) | |
| Mud Pump | |||
| 31 | Type | Hydrulic | |
| 32 | Model | BW250 | |
| 33 | Stroke | mm | 110 |
| 34 | Displacement | L/Min | 250 |
| 35 | Discharge pressure (Mpa) | Mpa | 4 |
| Dimension | |||
| 36 | Net Weight | T | 19.8 |
| 37 | Shipping Length | mm | 11500 |
| 38 | Shipping Width | mm | 2480 |
| 39 | Shipping Height | mm | 3550 |
| 40 | Working size(L*W*H) | mm | 11000*2480*6350 |
Characteristics
1.The drilling rig can use air DTH Hammer drilling and mud drilling.
2.Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce
the auxiliary time and enhance the work efficiency.
3.The truck chassis adopts the special crane chassis of different brand truck and the main drive system, the
transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed system are set up on the
chassis.
4.It's a hydraulicrotary drilling rig with directional circulation. It is equipped with mud pump which adopts the
slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5.The pulling force can be regulated and controlled, which adapt the machine to deep hole drilling.
6.It can set up a generator which is convenient to welding or illuminate for work at night.
7.Main winch are available on the rig so it is high efficiency when the rig drill on mud rock and on the
weathering formation.
8.Competitive in price, low cost of maintain.
FAQ
Q: Are you original manufacturer?
A: Yes, we JCDRILL is a official leading manufacture in drilling machinery in China and we have the whole
series products you need.
Q: Which payment terms are available to us?
A: T/T term or L/C term. On T/T term, 30% down payment is required in advance, and 70% balance shall be
settled before shipment.On L/C term, a 100% irrevocable L/C without "soft clauses" can be accepted.
Q: How long will the delivery time take?
A: Normally mud pump products will take about 3-15 days to produce the ordered machines. Most of the
time, we can have an immediate delivery of our regular machines in 15 days.
Q: How about after sales service?
A: 365×24 Year-round Service We are committed to year-round 24-hour service even during holidays,
in line.
Q:Spare Parts When You Need Them
A:We have spare parts centers across continents that stock specialist spare parts. We promise that spare
parts will be delivered within 72 hours or no more than one week.
){kind=link}