Trailer Type Water Well, Geotechnical Investigation Drilling Rig (JCDRILL)

• Customization: Available
• Certification: CE, ISO 9001:2000
• Condition: New
• Model NO.: TWD300
• Motor: Diesel Engine
• Drill Hole Diameter: 105mm-450mm
• Drill Hole Depth: 300m
• Bit Type: DTH Drill Bit
• Drilling Way: Compound
• Type: Four-Wheel trailer
• Trailer Type: 4X4
• Rotation Torque: 6900-9000n.M
• Pull Back Capacity: 20ton
• Transport Package: 40hq Container
• Specification: 5800*2210*2580mm
• Trademark: JCDRILL
• Origin: China
• HS Code: 8430419000
• Production Capacity: 2000/Set

Product Description

TWD300 Crawler Mounted Water Well Drilling Rig
TWD300 Multi-functional trailer mounted water well drilling rig is a efficient,multi-function full hydraulic water well\drilling rig.It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad.
TWD300 trailer mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling,DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.
TWD300 deep water well drilling rigs, in cutting drilling or rotary drilling can be operated in unconsolidated layer, and the slag can be discharged under by mud, the impact drilling operation can also be adopted and slag can be discharged by pressure air, the hydraulic water well drilling rig suitable for drilling complicated geological conditions.

Specification

General
1	Geology drilled		All kinds
2	Drilling Type		DTH & Mud Rotary
3	Drill system and operation		Hydraulic
4	Hole Diameter	mm	Φ105-Φ350
5	Hole Depth	m	300
6	Rotation Torque	Nm	7500
7	Rotation Speed	rpm	0-80    1st Gear
			0-160   2nd Gear
8	Drill pipe diameter	mm	89/114
9	Drill pipe length	mm	3000
10	Most. Feed Speed	M/min	18
11	Most. Lifting Speed	M/min	5-20
12	Feed Stroke	mm	3400
11	Most. Lifting force	N	120000
12	Lifting force of Main winch(Optional)	T	4
13	Lifting force of hoist	T	1.5
14	Lifting height of tool winch	m	6
Engine
15	Diesel Engine type	CMS
16	Rated Horse power	Kw	92
17	Electrical System	Volt	24
Compressor required
18	Compressor Type	Rotary Screw/Movable
19	Pressure Required	Mpa	1.2-3.5
20	Air consumption	m³/min	16-40
Mud Pump(Optional)
21	Type		Hydraulic
22	Model		BW450
23	Stroke	mm	100
24	Displacement	L/Min	250
25	Discharge pressure (Mpa)	Mpa	2.5
26	Suction tube diameter	mm	85
27	Discharge pipe diameter	mm	51
28	Foam pump		Optional
Dimension
29	Net Weight	KG	6100
30	Shipping Length	mm	5800
31	Shipping Width	mm	2210
32	Shipping Height	mm	2850
33	Ground Clearance	mm	300
34	Volume of Flow	mm	200

Product Configuration

Characteristics
1.The drilling rig can use air DTH Hammer drilling and mud drilling.
2.Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
3.The main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed system are set up on the chassis.
4.It's a hydraulicrotary drilling rig with directional circulation. It can equipped with BW450 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5.The power of drilling rig comes from a Yuchai engine,93kw Yuchai engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
6.The rotary head,have two gear,rotation speed is 0-80 and160rpm step less adjustment and the rotary torque is 6900Nm.
7.The pulling force can be regulated and controlled, which adapt the machine to deep hole drilling.
8.It can set up a generator which is convenient to welding or illuminate for work at night.
9.Main winch are available on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
10.The main drive of rig is hydraulic and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are also hydraulic operated.
11.The tools winch winch is used for auxiliary lifting and casing,optional main winch force of 4T, rope length of 100m and 8m lifting height.
12.The Hydraulic auxiliary functions are easy and efficient for guide extension, boom swing, boom lift, guide dumping.
13.Competitive in price, low cost of maintain.

Product Loading

FAQ                                                                                                                                                                       
Q: Are you original manufacturer?
A: Yes, we JCDRILL is a official leading manufacture in drilling machinery in China and we have
the whole series products you need.
Q: Which payment terms are available to us?
A: T/T term or L/C term. On T/T term, 30% down payment is required in advance, and 70% balance shall be settled before shipment.On L/C term, a 100% irrevocable L/C without "soft clauses" can be accepted.
Q: Which Incoterms 2010 terms can we work?
A: We JCDRILL are a professional and international company, accept all Incoterms 2010 terms, normally we work on FOB, CIF, CFR,CIP.
Q: How long will the delivery time take?
A: Normally mud pump products will take about 3-15 days to produce the ordered machines. Most of the time, we can have an immediate delivery of our regular machines in 15 days.
Q: How about after sales service?
A: 365×24 Year-round Service We are committed to year-round 24-hour service even during holidays, in line with our policy of always providing "a response within 15 minutes and job completion within 24 hours."
Q:Spare Parts When You Need Them
A:We have spare parts centers across continents that stock specialist spare parts. We promise that spare parts will be delivered within 72 hours or no more than one week.