CSD300 Truck Mounted Water Well Drilling Rig
CSD300 Multi-functional truck mounted water well drilling rig is a efficient,multi-function full hydraulic water well drilling rig.
It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and
agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working,
it is popular at home and abroad.
CSD300 truck mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer
in rock drilling,DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten
times than traditional rotary drilling.
CSD300 deep water well drilling rigs, in cutting drilling or rotary drilling can be operated in unconsolidated layer, and the
slag can be discharged under by mud, the impact drilling operation can also be adopted and slag can be discharged by
pressure air, the hydraulic water well drilling rig suitable for drilling complicated geological conditions.
Specification
| 1 |
Geology drilled |
|
All kinds |
| 2 |
Drilling Type |
|
DTH & Mud Rotary |
| 3 |
Drill system and operation |
|
Hydraulic |
| 4 |
Hole Diameter |
mm |
Φ140-Φ450 |
| 5 |
Hole Depth |
m |
300 |
| 6 |
Rotation Torque |
Nm |
4800-6500 |
| 7 |
Rotation Speed |
rpm |
60-120 |
| 8 |
Drill pipe diameter |
mm |
89/114 |
| 9 |
Drill pipe length |
mm |
4000/4500 |
| 10 |
Max.Push down capacity |
T |
5 |
| 11 |
Max.Pull up capacity |
T |
16 |
| Winch |
| 12 |
Lifting force of Main winch(Optional) |
T |
4 |
| 13 |
Lifting force of hoist |
T |
1.5 |
| 14 |
Length of steel wire rope(tool winch) |
m |
100 |
| 15 |
Lifting height of tool winch |
m |
8 |
| Engine |
| 16 |
Diesel Engine type |
YUCHAI |
| 17 |
Rated Horse power |
Kw |
70 |
| 18 |
Electrical System |
Volt |
24 |
| Compressor required |
| 19 |
Compressor Type |
Rotary Screw/Movable |
| 20 |
Pressure Required |
Mpa |
1.05-4.5 |
| 21 |
Air consumption |
m³/min |
16-60 |
| Truck |
| 22 |
Manufacturer |
|
SINOTRUCK HOWO |
| 23 |
Model |
|
ZZ1257M5847C |
| 24 |
Engine |
|
WD615.93C |
| 25 |
Rated Horse power |
Hp |
290 |
| 26 |
Discharge Standard |
|
EU-2 |
| 27 |
Drive type |
|
6*4 |
| 28 |
Max.Speed |
Km/h |
102.9 |
| 29 |
Steering wheel |
|
left/right(Optional) |
| Mud Pump |
| 30 |
Power Type |
|
Diesel engine |
| 31 |
Model |
|
BW450 |
| 32 |
Stroke |
mm |
110 |
| 33 |
Displacement |
L/Min |
450 |
| 34 |
Discharge pressure (Mpa) |
Mpa |
5 |
| Dimension |
| 35 |
Net Weight |
T |
20 |
| 36 |
Shipping Length |
mm |
11200 |
| 37 |
Shipping Width |
mm |
2500 |
| 38 |
Shipping Height |
mm |
3200 |
| 39 |
Working size(L*W*H) |
mm |
11000*2480*7147 |
Pictures
Charactics
1.The drilling rig can use air DTH Hammer drilling and mud drilling.
2.Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary
time and enhance the work efficiency.
3.The truck chassis adopts the 6X4 special crane chassis of brand Sinotruck Howo and the main drive system, the
transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed system are set up on the chassis.
4.It's a hydraulicrotary drilling rig with directional circulation. It is equipped with BW450/5 mud pump which adopts the
slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5.The power of drilling rig comes from a diesel engine,70kw Yuchai engine drives the large displacement high pressure
plunger pump and it is characterized by powerful dynamic and stable performance.
6.The rotary head,have two gear,rotation speed is 0-60 and120rpm stepless adjustment and the rotary torque is
4800-6500Nm.
7.The pulling force can be regulated and controlled, which adapt the machine to deep hole drilling.
8.It can set up a generator which is convenient to welding or illuminate for work at night.
9.Main winch are available on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
10.The main drive of rig is hydrulic and the four landing legs and drilling tower are hydraulic controlled. Transfer case and
mud pump clutch system are also hydraulic operated.
11.The tools winch winch is used for auxiliary lifting and casing,optional main winch force of 4T, rope length of 100m and
8m lifting height.
12.The Hydraulic auxiliary functions are easy and efficient for guide extension, boom swing, boom lift, guide dumping.
13.Competitive in price, low cost of maintain.
Shipping
FAQ
Q1. Is it a reliable company?
Beijing Jincheng Mining Technology Co.,Ltd is a professional manufacturer of drilling rig&drilling tools in Beijing,China, and specializes in the R&D, production, process and sale of water well drilling rig,rock blasting
drilling rig,anchor drilling rig,RC drilling rig,air compressor and relative drilling tools. We have satisfied a lot of domestic
and overseas clients' needs.
Q2: What about the delivery?
The drilling rig,air compressor usually shipment by sea or road,and drilling tools can be delivery by air.
Q3: What's the delivery time?
7-25 days after received your payment.
Q4: What's the package?
Strong and beautiful aluminum alloy case/carton case/wooden case.
Q5: Do you have any timely technology supports?Yes. We have a professional technology supporting team and the technical documents for your timely services, also you
can contact us by telephone, webcam, online chat (googletalk, MSN, skype, yahoo…). If you have problems,
please email us.
Q6: What's the payment method?
T/T, WESTERN UNION, MONEYGRAM
Q7: If the machines broken during the shipment, will you support us?Generally our customers will purchase the insurance before shipment to avoid any lost from rough transportation. We will
help you to solve the claims with the insurance companies to collect your money back in time.
Specification
){kind=link}