| After-sales Service: | Provided |
|---|---|
| Warranty: | Provided |
| Certification: | CE, ISO 9001:2000 |
| Condition: | New |
| Motor: | 24V |
| Drill Hole Diameter: | 109-900mm |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 1500m powerful truck mounted deep well drilling machine
CSD1500 Multi-functional truck mounted water well drilling rig is a efficient,multi-function full hydraulicwater well drilling rig.It is high efficiency because of having a larger torque of the turntable and is mainlyused for water well in industry and agriculture, national defense building foundation, geological exploration,geothermic well and other foundation working, it is popular at home and abroad.
CSD1500 truck mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation andair DTH hammer in rock drilling,DTH Hammer is applied in rock drilling, slag is discharged by air pressureand the offstage efficiency is ten times than traditional rotary drilling.
CSD1500 deep water well drilling rigs, in cutting drilling or rotary drilling can be operated in unconsolidatedlayer, and the slag can be discharged under by mud, the impact drilling operation can also be adopted andslag can be discharged by pressure air, the hydraulic water well drilling rig suitable for drilling complicatedgeological conditions.
Specification
| 1 | Geology drilled | All kinds | |
| 2 | Drilling Type | DTH & Mud Rotary | |
| 3 | Drill system and operation | Hydraulic | |
| 4 | Hole Diameter | mm | 105-900 |
| 5 | Hole Depth | m | 1500 |
| 6 | Rotation Torque | Nm | 12900-25800 |
| 7 | Rotation Speed | rpm | 70-140 |
| 8 | Drill pipe diameter | mm | 127/140 |
| 9 | Drill pipe length | mm | 4500/6000 |
| 10 | Axial pressure | T | 13 |
| 11 | Max. Pull back capacity | T | 61 |
| Winch | |||
| 12 | Lifting force of Main winch(Optional) | T | 4 |
| 13 | Lifting force of hoist | T | 1.5 |
| 14 | Length of steel wire rope(tool winch) | m | 100 |
| 15 | Lifting height of tool winch | m | 8 |
| Engine | |||
| 16 | Diesel Engine type | CUMMINS | |
| 17 | Rated Horse power | Kw | 179 |
| 18 | Electrical System | 24 | Volt |
| Compressor required | |||
| 19 | Compressor Type | Rotary Screw/Movable | |
| 20 | Pressure Required | Mpa | 1.05-6.9 |
| 21 | Air consumption | m³/min | 16-96 |
| Truck | |||
| 22 | Manufacturer | SINOTRUCK HOWO | |
| 23 | Model | ZZ1317M4661W | |
| 24 | Engine | WD615.61A | |
| 25 | Rated Horse power | Hp | 420 |
| 26 | Discharge Standard | EU-2 | |
| 27 | Drive type | 8*4 | |
| 28 | Max.Speed | Km/h | 102.9 |
| 29 | Steering wheel | left/right(Optional) | |
| Mud Pump | |||
| 30 | Type | Hydrulic | |
| 31 | Model | BW1500/12 | |
| 32 | Stroke | mm | 260 |
| 33 | Displacement | L/Min | 1500 |
| 34 | Discharge pressure (Mpa) | Mpa | 12 |
| 35 | Suction tube diameter | mm | 89 |
| 36 | Discharge pipe diameter | mm | 51 |
| 37 | Liner Diameter | mm | 150 |
| Hydraulic Welder(Optional) | |||
| 38 | Mnufacturer | Finland Dynaset | |
| 39 | Welding current | A | 60-250 |
| 40 | Hydraulic Min.oilflow | L/min | 42 |
| 41 | Nom/Max Pressure | Bar | 190/210 |
| 42 | Voltage | V | 110/220VDC |
| 43 | Power | Kw | 1or2 |
| Generator | |||
| 44 | Generator | Optional | |
| Dimension | |||
| 45 | Net Weight | T | 35 |
| 46 | Shipping Length | mm | 11500 |
| 47 | Shipping Width | mm | 2480 |
| 48 | Shipping Height | mm | 3650 |
| 49 | Working size(L*W*H) | mm | 11000*2480*7147 |
Characteristics
1.The drilling rig can use air DTH Hammer drilling and mud drilling.
2.Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
3.The truck chassis adopts the 6X4 special crane chassis of brand Sinotruck Howo and the main drive system,
the transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed system are set up on the
chassis.
4.It's a hydraulicrotary drilling rig with directional circulation. It is equipped with BW1500/12 mud pump
which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable
drilling bit.
5.The power of drilling rig comes from a CMS engine,132kw CMS engine drives the large displacement
high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
6.The rotary head,have two gear,rotation speed is 0-80 and110rpm stepless adjustment and the rotary torque
is 9600-24500Nm.
7.The pulling force can be regulated and controlled, which adapt the machine to deep hole drilling.
8.It can set up a generator which is convenient to welding or illuminate for work at night.
9.Main winch are available on the rig so it is high efficiency when the rig drill on mud rock and on theweathering formation.
10.The main drive of rig is hydrulic and the four landing legs and drilling tower are hydrauliccontrolled. Transfer case and mud pump clutch system are also hydraulic operated.
11.The tools winch winch is used for auxiliary lifting and casing,optional main winch force of 4T,rope length of 100m and 8m lifting height.
12.The Hydraulic auxiliary functions are easy and efficient for guide extension, boom swing, boomlift, guide dumping.
13.Competitive in price, low cost of maintain.
A: Yes, we JCDRILL is a official leading manufacture in drilling machinery in China and we have
the whole series products you need.
Q: Which payment terms are available to us?
A: T/T term or L/C term. On T/T term, 30% down payment is required in advance, and 70% balance shall be settled before shipment.On L/C term, a 100% irrevocable L/C without "soft clauses" can be accepted.
Q: How long will the delivery time take?
A: Normally mud pump products will take about 3-15 days to produce the ordered machines. Most of the time, we can have an immediate delivery of our regular machines in 15 days.
Q: How about after sales service?
A: 365×24 Year-round Service We are committed to year-round 24-hour service even during holidays, in line with our policy of always providing "a response within 15 minutes and job completion within 24 hours."
Q: Spare Parts When You Need Them
A:We have spare parts centers across continents that stock specialist spare parts. We promise that spare parts will be delivered within 72 hours or no more than one week.
Related Products
|
|
|
| CSD300 Drilling Truck | CSD400 Drilling Truck | CSD800 Drilling Truck |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}